Anycubic Standard Resin V2 – Beige

Enhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for fast, clean results | Compatible with all 405nm LCD/DLP printers

The Anycubic Standard Resin V2 in Beige is a reformulated photopolymer resin designed for makers and hobbyists who demand both strength and detail from their LCD or DLP 3D printer. Its enhanced toughness means finished models resist drops and impacts, flexing without brittle fracture — making it well suited to figurines, enclosures, snap-fit parts, and functional prototypes alike. A low-viscosity formulation promotes rapid resin flow, faster bubble dissipation, and superior bed adhesion, reducing print failures and delivering smoother surfaces with finer detail reproduction. With a 4.3% volumetric shrinkage rate, dimensional accuracy is kept tight so your prints come out true to your design. The resin is compatible with all 405nm UV-curing LCD and DLP printers on the market, and pairs with Anycubic’s Photon Workshop slicer, which ships pre-loaded with optimised settings so you can start printing without manual parameter tuning.

Features

• Enhanced toughness — models resist impacts and flex without brittle fracture
• 4.3% volumetric shrinkage rate for high dimensional accuracy and deformation resistance
• Low-viscosity formula with fast bubble dissipation for fine detail and smooth surfaces
• Superior bed adhesion to reduce model detachment and print failures
• Compatible with all 405nm UV-curing LCD/DLP 3D printers
• Works seamlessly with Anycubic Photon Workshop slicer’s pre-configured optimal settings
• Low-odour formulation for a more comfortable printing environment
• Cleanable with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW/cm²

Specifications

• Colour: Beige (#FCC89B)
• Pre-print preparation: Shake well before use
• Print environment: 20-40 ℃
• First layer exposure duration:20-40 s
• Normal exposure duration:2.5-3 s
• Print temperature: 20-50 ℃
• Material: Photopolymer Resin
• Wavelength: 365-405 nm
• Viscosity: 250-350/mPa·s(25℃)
• Density: 1.05-1.25/g/cm³
• Hardness: 80-83 HD
• Tensile Strength: 35-45 MPa
• Elongation at Break: 25-30%
• Bending Modulus: 40-50 MPa
• Bending Strength: 1500-2100 MPa
• Young’s Modulus: 1200-1400 MPa
• Izod Impact Strength: 192 J/m
• Volume Shrinkage Rate: 4.3-5.6%
• Cleaning: 95% IPA
• Washing duration: ≥3 mins
• UV Wavelength: 405 nm
• Curing Temperature: 18-30 ℃
• UV Intensity: 25000-30000 uW/cm²
• Curing time: 3 mins
• Disposal: Post-UV-curing resin is treated as plastic waste
• Product Weight: 1kg

What’s in the Box

• Anycubic Standard Resin V2 – Beige x1